If you wish to learn more information regarding voltage level translator, then you certainly came off to the right place. Making a good choice when going to get a voltage level translator is just not simple, so we hope that you will use this information to make the most well informed decision.
Table of Contents
- 1 What is the best voltage level translator to buy?
- 2 Best Voltage Level Translator Reviews
- 3 Offers and Discounts
- 4 Cheap Voltage Level Translator
- 5 Buy Voltage Level Translator Online
- 5.1 TXB0104 Breakout - Bidirectional Voltage Level Translator
- 5.2 Icstation 8 Channel Voltage Level Translator PNP NPN PLC Signal Converter Module 24V to 3.3V
- 5.3 Level Translator 5V/24V 8 Channel Voltage Level Translator Square Wave PNP NPN Signal Converter Module, Voltage Level Converter Board 10MHZ
- 5.4 NOYITO TXB0104 4-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing and 15-kV ESD Protection (Pack of 2)
- 5.5 WINGONEER TXB0104 4-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing and ?15-kV ESD Protection
- 5.6 PCA9306 Level Conversion Module Dual Bidirectional Voltage-Level Translator Breakout Board Module
- 5.7 NOYITO PCA9306 2-bit Bidirectional IIC Bus and SMBus Voltage-Level Translator Module
- 5.8 LIVISN 24V to 5V 8 Channel Optocoupler Isolation Board Voltage Level Translator PNP NPN to NPN PLC Signal Converter Module (8CH, 24V to 5V)
- 5.9 PLC MCU Level Translator Module, 10Mhz 8 Channel NPN/PNP to NPN 5V/24V Voltage Level Converter with Square Wave Shaping Amplification Function, 35mm Din Rail Mount
- 5.10 ANMBEST 5PCS 4 Chanels High Speed Bi-Directional 3.3V-5V Logic Level Converter for Arduino Raspberry Pi Electronic Development
- 6 Best Voltage Level Translator 2022
What is the best voltage level translator to buy?
This is the top rated selected item of other customers getting items related to voltage level translator. For further alternatives, check out our full recomendations of Voltage Level Translator or use the search box.
A lot of people have bought the voltage level translator previously, and now you can take advantage of what they have to say regarding this product. Continue reading this short article if you wish to learn more about voltage level translator.
Best Voltage Level Translator Reviews
We have now selected some interesting videos which will help you learn more about voltage level translator.
Press the right upper simbol to get more video recomendations.
Offers and Discounts
If you are looking for cheap Voltage Level Translator, here we will post any offer that we find:
If there are no available offers at this moment, bookmark this page and come back in a couple of days. Price and availability change quickly.
Cheap Voltage Level Translator
The cheapest options among the top 10:
Buy Voltage Level Translator Online
TXB0104 Breakout - Bidirectional Voltage Level Translator
- 1.2V to 3.6V on A Port and 1.65V to 5.5V on B Port (VCCA ≤ VCCB)
- VCC Isolation Feature – If Either VCC Input Is at GND, All Outputs Are in the High-Impedance State
- OE Input Circuit Referenced to VCC
- Low Power Consumption, 5-μA Max ICC
Icstation 8 Channel Voltage Level Translator PNP NPN PLC Signal Converter Module 24V to 3.3V
- 8 channel 24V to 3.3V voltage level shifter board for MCU/PLC signal level converting,PNP/NPN to NPN
- Each channel equipped with indicator easier to recognise working status
- Board Size:85X98X18mm/3.35 X3.86X0.71(L*W*H)
- Ship it out by USPS with tracking information and 7-17 days delivery time usually
Level Translator 5V/24V 8 Channel Voltage Level Translator Square Wave PNP NPN Signal Converter Module, Voltage Level Converter Board 10MHZ
- 5V/24V LEVEL CONVERTER BOARD--The module can convert input 5V level signal to 24V level signal, or convert input 24V level signal to 5V level signal
- IMPROVES ANTI-INTERFERENCE ABILITY--It can also convert signal 5V to 5V, or 24V to 24V level, and isolate input signal and output signal through optocoupler, which can improves anti-interference ability of circuit
- EASY TO OPERATE--Input level can be set by DIP switch, 24V level output is NPN OC output, output current is 100mA
- HIGH EFFICIENCY MULTI-FUNCTIONAL LEVEL TRANSLATOR--It has conversion and amplification circuit, good wave, strong driving ability
- COMPATIBLE COMMON-CATHODE--Compatible with a common-cathode or common-anode input connection, matching European and Japanese PLC interface standards
NOYITO TXB0104 4-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing and 15-kV ESD Protection (Pack of 2)
- This 4-bit noninverting translator uses two separate configurable power-supply rails.
- The A port is designed to track Vcca. Vcca accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track Vccb. Vccb accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. Vcca should not exceed Vccb.
- When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- The TXB0104 is designed so that the OE input circuit is supplied by Vcca.
- This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
WINGONEER TXB0104 4-Bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing and ?15-kV ESD Protection
- This 4-bit noninverting translator uses two separate configurable power-supply rails.
- The A port is designed to track Vcca. Vcca accepts any supply voltage from 1.2 V to 3.6 V. The B port is designed to track Vccb. Vccb accepts any supply voltage from 1.65 V to 5.5 V. This allows for universal low-voltage bidirectional translation between any of the 1.2-V, 1.5-V, 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. Vcca should not exceed Vccb.
- When the output-enable (OE) input is low, all outputs are placed in the high-impedance state. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver.
- The TXB0104 is designed so that the OE input circuit is supplied by Vcca.
- This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.
PCA9306 Level Conversion Module Dual Bidirectional Voltage-Level Translator Breakout Board Module
- 【BIDIRECTIONAL VOLTAGE CONVERSION】Provide bidirectional voltage conversion without direction pin, just apply low-end and high-end reference voltage to VREF1 and VREF2 respectively to connect your I/O and drive the Enable pin to high level
- 【REDUCE SIGNAL DISTORTION】The 3.5Ω low conduction state connection between the input and output ports of the level converter breakout board module can reduce signal distortion
- 【COMPATIBILITY】Compatible with standard mode, fast mode and fast mode Plus I2C bus and SMBus, with a maximum propagation delay of less than 1.5 ns, to adapt to standard mode and fast mode I2C bus devices and multiple hosts
- 【FUNCTION】This is the breakout board of the PCA9306 bidirectional bidirectional voltage level converter, since different components sometimes use different voltage levels for communication, the voltage level converter can be the key to making different components perform well
- 【USE PARAMETERS】PCA9306 is a bidirectional I2C bus and SMBus voltage level converter, which can work at the low end of 1.0 V to 3.6 V and work at the high end of 1.8 V to 5.5 V
NOYITO PCA9306 2-bit Bidirectional IIC Bus and SMBus Voltage-Level Translator Module
- The PCA9306 device allows bidirectional voltage translations between 1.2 V and 5 V, without the use of a direction pin. The low ON-state resistance (RON) of the switch allows connections to be made with minimal propagation delay.
- When EN is high, the translator switch is ON, and the SCL1 and SDA1 I/O are connected to the SCL2 and SDA2 I/O, respectively, allowing bidirectional data flow between ports. When EN is low, the translator switch is off, and a high-impedance state exists between ports.
- In addition to voltage translation, the PCA9306 device can be used to isolate a 400-kHz bus from a 100-kHz busby controlling the EN pin, and disconnecting the slower bus during fast-mode communication.
- Less than 1.5 ns maximum propagation delay to accommodate Standard-mode and;
- Fast-mode I2C-bus devices and multiple masters;
LIVISN 24V to 5V 8 Channel Optocoupler Isolation Board Voltage Level Translator PNP NPN to NPN PLC Signal Converter Module (8CH, 24V to 5V)
- This is an 8 channel one-way transmission digital signal converter. It can convert PNP signal to NPN. Support max conversion frequency 20KHz.
- It is also a DC 24V to 5V voltage level converter board. Support MCU/PLC signal level converting.
- Each channel equipped with an LED indicator, make it easier to recognize their working status.
- Attention: The DC power supply is the same as the signal output voltage. For example, if the signal is 3.3V to 5V, then VCC = 5V input.
- Please feel free to contact us if you have any question about the product. We provide replacement if you get a defective unit.
PLC MCU Level Translator Module, 10Mhz 8 Channel NPN/PNP to NPN 5V/24V Voltage Level Converter with Square Wave Shaping Amplification Function, 35mm Din Rail Mount
- The module can convert input 5V level signal to 24V level signal, or convert input 24V level signal to 5V level signal
- It can also convert signal 5V to 5V, or 24V to 24V level, and isolate input signal and output signal through optocoupler, which can improves anti-interference ability of circuit
- Input level can be set by DIP switch, 24V level output is NPN OC output, output current is 1.5A
- It has conversion and amplification circuit, good wave, strong driving ability
- Compatible with a common-cathode or common-anode input connection, matching European and Japanese PLC interface standards
ANMBEST 5PCS 4 Chanels High Speed Bi-Directional 3.3V-5V Logic Level Converter for Arduino Raspberry Pi Electronic Development
- CONVERT DIFFERENT LOGIC LEVELS:This logic level converter features four high speed bi-directional 4 channels, allowing for safe and easy communication between devices operating at different logic levels. Converting between logic levels as low as 1.5 V on the lower-voltage side and as high as 18 V on the higher-voltage side.
- SUITABLE FOR MULTIPLE INTERFACES: Its four channels are enough to support most common bidirectional and unidirectional digital interfaces, including I²C, SPI, and asynchronous TTL serial.
- FAST CONVERSION: The logic high levels on each side of the shifter are achieved by 10 kΩ pull-up resistors to their respective supplies; these provide quick enough rise times to allow decent conversion of fast mode (400 kHz) I²C signals or other similarly fast digital interfaces (e.g. SPI or asynchronous TTL serial). External pull-ups can be added to speed up the rise time further at the expense of higher current draw.
- UNIVERSAL COMPATIBILITY: Module compatible breadboard, can be directly inserted in the breadboard to use.
- ATTENTION:This module comes with male header pins that require soldering.
Best Voltage Level Translator 2022
These are the new Voltage Level Translator releases available. Will the best Voltage Level Translator 2022 be among them?
Related Products:
Last update 2021-08-05. Price and product availability may change.